Ion Chromatograph CLIC-605 is integrated with conductivity and amperometric detectors for precise analysis of ionic species. It features a high-performance pump, delivering flow rates from 0.001 to 12.000 mL/min. Equipped with column oven to support precise temperature control. Built-in software provides real-time monitoring, and multi-channel acquisition. Our Ion Chromatograph offers excellent flow stability, user-friendly operation and accuracy.
| Qualitative Repeatability | ≤0.05% |
| Quantitative Repeatability | ≤0.3% |
| Pump Flow Rate | 0.001 to 12.000 mL/min |
| Pump Head Pressure | 0 to 42 MPa |
| Flow Rate Setting Error | < 0.1% |
| Flow Stability | ≤ ± 0.1% |
| Pressure Accuracy | 0.01 Mpa |
| Pressure Pulsation | < 0.25% |
| Detector Baseline Noise | ≤ 0.0003 μS/cm |
| Detector Baseline Drift | ≤ 0.001 μS/cm per 30min |
| Detector Resolution | 0.00238 nS/cm |
| Minimum Detectable Concentration | (Cl): ≤ 0.0001 ug/mL |
| Conductivity Cell Volume | ≤ 0.4 μL |
| Conductivity Cell Detection Range | 0 to 45000 μS/cm |
| Conductivity Cell Temperature Error | ±0.01℃/hr |
| Conductivity Cell Temperature Resolution | 0.01℃ |
| Conductivity Cell Temperature Range | 5℃ to 65℃ |
| Conductivity Cell Compensation Range | 0 to 3.0 % |
| Conductance Cell Stability | 0.05℃ |
| Conductivity Cell Pressure | 15 MPa |
| Driving Voltage Range | -2.048V to +2.048V |
| Driving Voltage Resolution | 0.001V |
| DC Mode | 1pA to 74uA |
| Pool Volume | <0.2 uL |
| Ampere Minimum Detection Concentration | I: 0.001μg/mL |
| Suppressor Current Source Range | 0 to 500 mA, increment 0. 1mA |
| Suppressor Dead Volume | 50 μL |
| Suppressor Inhibition Capacity | 170 μeq/min |
| Suppressor Withstand Pressure | 3 MPa |
| Column Oven Temperature Range | RT +5℃ to 70℃ |
| Column Oven Temperature Stability | ≤ 0. 1℃ |
| Column Oven Temperature Error | 0.05 ℃ |
| Column Oven Compatibility | 250mm and 150mm columns |
| Autosampler Repeatability | <0.5% |
| Autosampler Linearity | >0.9995 |
| Autosampler Working Temperature | 10 to 40°C |
| Autosampler Injection Volume | 10 uL to 4000 uL |
| Autosampler Single Injection Cycle | About 20s |
| Autosampler Cleaning Positions | 2 Positions (Fine and Coarse) |
| Power Supply | 220V, 50HZ |
| Mainframe Dimension | 550 × 300 × 700 mm |
| Autosampler Dimension | 376 × 556 × 360 mm |
| Mainframe Packing Dimension | 710 × 430 × 890 mm |
| Autosampler Packing Dimension | 600 × 520 × 630 mm |
| Net Weight | 80 Kg |
| Gross Weight | 93 Kg |
High Sensitivity
Eluent Generator
Low Detection Limits
Stable Baseline Performance
Autosampler
Ion Chromatograph CLIC-605 is used for precise detection and quantification of anions and cations in samples across environmental monitoring, pharmaceutical analysis, food safety testing, and industrial quality control.
Phillips screwdriver (cross slit), 5 × 100mm - 1 piece
Phillips screwdriver (cross slit), 4 × 100mm - 1 pc
One-piece screwdriver, 3 × 80mm - 1 piece
Tweezers ×1 piece
Adjustable wrench × 1piece
Open-end dull wrench × 1 piece
Allen key × 1 piece
Plastic syringes, 20 mL × 5 pieces
Syringes, 5 mL × 5 pcs
Silicone tube, φ6 × φ9 mm
Trachea (black), φ4mm
Trachea (black), φ6mm
PEEK Dosing Ring, 25 µL × 1 pc
PEEK Dosing Ring, 50 µL × 1 pc
PEEK Dosing Ring, 100 µL × 2 pcs
PEEK Dosing Ring, 500 µL × 1 pc
Back pressure tube assembly, 1 to 3 MPa × 1pc
Back pressure tube assembly, 2 to 4 MPa × 1pc
Back pressure tube assembly, 3 to 5 MPa × 1pc
Back pressure tube assembly, 4 to 14 MPa × 1 pc
Quick-change couplings × 2 pc
Oxygen Pressure Reducing Valve × 1 pc
Pressure reducing valve × 1 pc
Pipe cutter × 1pc
Category 7 cable × 3 meters
Category 7 cable × 1 meter
Terminal (electrical engineering) - PEEK hand tight fitting × 15 pcs
Long Threaded Spit Fastening Fittings × 3 pc
Double-ended blade ring × 14 pc
PFA Tube- 1/8 OD - 1/16 ID × 2 meters
Degassing device two-way × 4pc
USB flash drive × 1pc
SENTINEL sub-lock × 1pc
Power cable, 3 meters × 1 pc
Aqueous Needle Filter, 13 mm × 0.45 µm - 1 pack
Organic Phase Needle Filter, 13 mm × 0.45 µm - 1 pack
PEEK Tube-1/16 ID: 0.5 mm, 1 meter
PEEK Tube-1/16 ID: 0.75 mm, 1 meter
PEEK Tube-1/16 ID: 0.25 mm, 1 meter
Toolbox × 1 piece
SOP for Ion Chromatography × 1 sheet
Suppressor Operating Instructions × 1pc
Y-type tee connector × 1 piece
Switch (telecommunications) × 1 pc
Power adapter × 1 pc
4 × 10 Plate Head Combination, 1 set
Luer Fittings × 1 pc
Eluent bottle assembly × 4 pc
Anion Suppressor × 1 pc
Cation Suppressor × 1 pc
Nitrogen pressurized components × 1pc
KOH eluent generator kit × 1 pc
Hydrogen Oxide System boot-up kit × 1pc
Conductivity detector × 1pcs
Hydronic P1 anion columns, φ4.0 × 150 mm, 1 pc
Anionic Guard Columns, φ4.0 × 30 mm, 1 pc
Cation Chromatography Columns, φ4.6 × 250 mm, 1 pc
Cationic Guard Columns, φ4.0 × 30 mm, PEEK material-1 pc
Socket converter × 1 piece
Column × 1 piece
Suppressor × 1 piece
KOH eluent generator × 1pc
120 vials autosampler × 1pc
Conductivity Detector × 1pc
Guard Column& IC Column × 1 Set
Suppressor × 1 pc
Ampere detector
Ask Our Experts
